How to Configure TP-Link N router as a wireless Access Point?

Connect Your Computer to the Router

How do I configure the basic wireless settings for my TP-Link 11N Wireless Router?
Then just click Save and the domain name will be bound to your router automatically. Not Helpful 0 Helpful Fire and electric codes are easier to follow with wireless, since there are no overhanging wires or tape and staples holding wires all along floors or ceilings. Featured Articles Wireless Networking. Not Helpful 8 Helpful 9. Share Share on Facebook. The network name should be memorable.

What Is a DHCP Server?

How to configure the basic wireless settings of TP-Link wireless DSL router

Currently most of the applicable models only support the online upgrade feature, and other cloud functions will be added in the future firmware. Please check the hardware version on the label at the back of the router. For how to, please click here. Click Register , enter a hostname to create your own domain name, for example, test. Then just click Save and the domain name will be bound to your router automatically.

TP-Link takes your privacy seriously. Switches Boosts your business network with premium performance. Business Wireless Takes your enterprise Wi-Fi to new levels. Support Where to Buy. Configuration Guide Updated As more and more devices are able to connect to wireless networks, setting up a wireless router has become a crucial step for virtually any home network.

Setting up a wireless network will allow your devices to connect to the internet from practically anywhere in the house, without the need for messy wires. To get started setting your network up, see Step 1 below. To set up a router in your home, connect the router to your wireless modem with an Ethernet cable, plug the router's power cable into a power source, and turn on the router if it doesn't start up already.

You can then connect your computer or smartphone to the router by selecting the router's name in the Wi-Fi menu and entering the password found on the back or bottom of the router. Featured Articles Wireless Networking.

Quick Summary To set up a router in your home, connect the router to your wireless modem with an Ethernet cable, plug the router's power cable into a power source, and turn on the router if it doesn't start up already. Did this summary help you?

Purchase a wireless router. Routers come in all shapes and sizes. Compare features to find the router that is right for you. If more than one wireless device will be connecting at the same time at different speeds, a MiMo type router is recommended, otherwise the speed for all devices will drop the highest supported by all at that time.

All modern routers should support This is the most stable, offers the fastest speeds and is backwards compatible with older standards such as Connect your router to your modem. Routers and wireless routers enable you to share your broadband internet connection with multiple devices. To do so, you will need to connect your broadband modem to the router. For best results, place your router near your modem.

Connect the router and the modem with an Ethernet cable. Most routers come packaged with a short Ethernet cable that you can use for this. It is usually offset, and may be a different color from the LAN Ports. The router will assign a local or "private" IP address to any device connected to its LAN Ports or WiFi signal from a pool of private addresses listed further below.

Connect any devices you want to hard wire with CAT 5 or better Ethernet cables. If you have computers that are close, or a video game console or TV, you can connect them to the router via Ethernet.

Connect at least one computer via Ethernet. You will need at least one computer connecting via Ethernet cable in order to adjust your router settings. You can disconnect this computer afterwards if you want to connect wirelessly.

You can also connect your laptop wirelessly for the first time, the wifi network name and the default password will be printed on the router's label.

When you power on the router, it will only create its wi-fi network, and the device will be connected to the router's wi-fi connection, not the internet. To connect the router to the internet, with some internet providers i. MAC of the router can be found printed on router or in the documents etc.

Go to the internet service provider's website. Log in with the username and password provided by the internet service provider and go to MAC address update option. Add the router's MAC address there and save it. This process means that the router is authorized to use the internet provide by the broadband company.

Find the IP address of the router. If this is a new installation or new router, determine the default IP address that may be printed on a label affixed to the router or in the documentation.

IP addresses are formatted as four groups of up to three digits, separated by periods. Commonly found "default" Local IP addresses for routers are Note that all the addresses in the follow ranges: Open a web browser on the computer that is connected to the router. Enter in the IP address of the router into the address bar and press Enter. If your router came with an installation disc, you can run the configuration program from that instead. It will accomplish many of the same functions.

Enter your username and password. In order to access the configuration page, you will need to be on the router's IP address and enter a valid username and password at the prompt. Most routers have a basic account set up that you will need to use to log on. This varies from model to model, but should be printed on the router or in the documentation. Many routers will only require a username and a blank password, and some allow you to leave all fields blank.

Open the Wireless Settings. There will be several options to choose from. The Internet section can usually be left at default settings, unless you received specific instructions from your internet service provider.

The Wireless section will allow you to set up your wireless network. Enter a name for your wireless network. Enter a unique name for your wireless network. This is what other devices will see when scanning for networks. Check the box to enable SSID broadcast. Choose a security method. Choose from the list of available security options.

This is the most difficult security to crack, and will give you the most protection from hackers and intruders. This should be a difficult password, with a combination of letters, numbers, and symbols.

Once you are finished naming and securing your wireless network, click the Apply or Save button. The changes will be applied to your router, which may take a few moments.

What Is the Difference Between DHCP and DNS?

Leave a Reply